Manhole Covers, Gratings & Surface Boxes
D400 Ductile Iron Manhole Cover & Frame
Heavy-duty hinged cover for carriageways, with lockable seat and anti-rock design.
- D400 (400 kN)
- BS EN 124-2
Product catalogue
Engineering-grade materials, ready to quote
Filter by category, search by name or standard, and add items to a single quote request.
Products
21 products
Manhole Covers, Gratings & Surface Boxes
Hot-Dip Galvanized Steel Bar Grating
Welded bar grating panels and trench covers for walkways, platforms and drainage.
- Pedestrian to D400 (by bar depth)
- BS 4592-1
Manhole Covers, Gratings & Surface Boxes
Composite Valve & Meter Surface Box
Lightweight, non-conductive surface boxes for water valves, meters and hydrants.
- B125 (125 kN)
- BS EN 124-5
Manhole Covers, Gratings & Surface Boxes
Recessed Infill Manhole Cover
Tray-type cover that takes the surrounding paving or tiles for a seamless finish.
- B125 – D400
- BS EN 124
Telecom & Utility Boxes
JRC Telecom Joint Box Covers
Multi-part JRC covers for telecom joint boxes, in carriageway and footway grades.
- B125 – D400
- BS EN 124
Telecom & Utility Boxes
Precast Concrete Utility Chamber
Reinforced precast chambers with knock-out duct entries, ready for fast installation.
- D400 rated top slab
- BS EN 1917
Telecom & Utility Boxes
Polymer Fibre Draw Pit
Stackable polymer draw pits for FTTH and fibre backbone networks.
- B125 (125 kN)
- BS EN 124-5
Marine Plywood & Timber Boards
BS 1088 Marine Plywood
Void-free hardwood marine ply bonded with WBP phenolic glue for wet environments.
- BS 1088
Marine Plywood & Timber Boards
Film-Faced Shuttering Plywood
Phenolic film-faced ply for formwork, giving 8–12 clean concrete pours per sheet.
- EN 636-3
Marine Plywood & Timber Boards
Kiln-Dried White Wood Timber
Planed and rough-sawn spruce for formwork, packing and general carpentry.
- EN 14081-1
Ceramic & Vitrified Tiles
Full-Body Vitrified Porcelain Tiles
Dense porcelain with colour through the body for high-traffic commercial floors.
- R10 slip, PEI 4
- ISO 13006 BIa
Ceramic & Vitrified Tiles
Glazed Ceramic Wall Tiles
Rectified wall tiles in matt and gloss finishes for wet areas and kitchens.
- Wall use
- ISO 13006 BIII
Ceramic & Vitrified Tiles
Heavy-Duty Industrial Floor Tiles
20 mm porcelain for warehouses, workshops and external pedestrian areas.
- R11 slip
- ISO 10545-4
Steel Fabrication & Galvanized Steel
Hot-Dip Galvanized Structural Steel
Beams, columns, channels and angles, cut to length and galvanized for the Gulf climate.
- Per design
- BS EN 10025
Steel Fabrication & Galvanized Steel
Custom Steel Fabrication
Platforms, frames, supports and covers fabricated to your shop drawings.
- Per design
- BS EN 1090-2 (EXC2)
Steel Fabrication & Galvanized Steel
Galvanized Strut Channel & Supports
Slotted strut, brackets and fittings for MEP supports and cable routes.
- Per load table
- BS 6946
Steel Fabrication & Galvanized Steel
Steel Handrails & Access Ladders
Galvanized handrails, cat ladders and safety cages for plant and rooftops.
- 0.74 kN/m line load
- BS 6180
Epoxy, Fasteners & Industrial Consumables
Epoxy Grout & Anchoring Resin
Two-part epoxy for base-plate grouting, rebar anchoring and heavy-duty fixings.
- Compressive strength ≥ 90 N/mm²
- ASTM C579
Epoxy, Fasteners & Industrial Consumables
High-Tensile Bolts, Nuts & Washers
Grade 8.8 and 10.9 fasteners in black, zinc-plated and galvanized finishes.
- Grade 8.8 / 10.9
- ISO 898-1
Epoxy, Fasteners & Industrial Consumables
Chemical & Mechanical Anchors
Wedge anchors, sleeve anchors and threaded studs for concrete and masonry.
- Per ETA load tables
- EAD 330232
Epoxy, Fasteners & Industrial Consumables
Site & Industrial Consumables
Cutting and grinding discs, welding electrodes, sealants and PPE in bulk.
- EN 12413
No matching products
We source far more than we list here. Tell us what you need and we'll find it.
Request it in a quote